Buffalo 27UD Ironworker 130 tons 30" throat 6 x 6 angle iron

Description

Buffalo Model 27 UD Ironworker.
NOTE:  Regrettably, I am not going to sell this machine in the USA because it is not an air clutch machine.  I cannot accept bids if you are in the US.  US companies that guarantee this machine is going to be exported to a foreign division are welcome to bid.  You must contact me first to let me know that.  I've done business this way before.
Specifications in 65,000 lb tensile strength mild steel are:
130 tons of punch power, 1 3/8" diameter hole in 1" thick 65,000 lb tensile strength material
30 inch deep throat! and extra high throat for working large H-beams!
14" wide bar shear with max of 1" thick (not sure of width.  Data sheet is vague on that one)
6 x 6 x 3/4" angle iron at 90 degrees and 4 x 4 x 5/8" angle at 45 degrees miter
2 1/8" square shear capacity
2 1/2" round bar capacity
15 HP motor, presently on 440/480 volt
Shipping weight 21,000 lbs
Shipping dimensions130" tall (with 4x4 runners under it), 127" long, and 71" wide
10 ft 6 in tall
1 3/4" of stroke in mechanical movement
Central oiling system and grease points for lubrication
Will discuss loading arrangements with a serious potential buyer.  Flatbed loading is the only way I can easily do without making other arrangements or preparation.  Contact me about that.
pinpointmachine.com is where to find us.