GnarWolf Chainguide ISCG 05 Mount

Description

If you are a rider that fearlessly takes the tough lines and can't afford to drop a chain, the Wolf Tooth GnarWolf® chainguide is for you. Designed specifically for any bike that has ISCG 05 Mount and a 1x wide/narrow chainring. The GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. Refer to image on this page for installation and adjustment instructions.
Patented infinite chainline adjustment between 48mm and 54mm via an elliptical expanding mandrel. No shims required.
Infinite vertical adjustment between 28t and 36t for round chainrings and  28t-34t elliptical
Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments
All adjustments made with common 4 mm hex key
Designed for the rigors of Enduro, heavy trail, mud and even DH riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g
Specific guide shaping is optimized for use with elliptical and round chainrings
Installation takes just a few minutes – no need to remove your crank arms
Compatibility
Designed to fit on any bike with an ISCG 05 Mount
Installation shown in photos on this page
Optimized for use with both elliptical and round chainrings
Round chainrings 28t-36t or elliptical chainrings 28t-34t
For 1x use only
Minimum distance of 10 mm between crank and center of ring
Not compatible with crankset mounted bashrings
Due to frame and bike geometry there will be some bikes that need modifications or flat out won't work. Here are the known exceptions:
Ibis Mojo 3 - will not work
Ibis Ripmo - will not work
Ibis Ripley - will not work
Specialized Stumpjumper 2016-2017 models require 1 mm of spacers (washers will work) between the frames ISCG05 mounts and the guide (the guide interferes with the frame otherwise).
Evil The Following - will not work (upper swing arm interferes)
Santa Cruz Tallboy  - will not work
Tech Specs
Weight:
44g
Material:
6061-T6 with stainless steel hardware
Made in the USA
US Patent 10464635
Listing and template services provided by inkFrog