SHURFLO 902-100 SUBMERSIBLE SOLAR PUMP CONTROLLER 9300 SERIES 24VOLT

Description

SHURFLO 902-100 SUBMERSIBLE SOLAR PUMP CONTROLLER 9300 SERIES 24VOLT
Shurflo Submersible Pump
Controllers
902-100
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.
So why should you get a controller with your pump? Well, bottom line is they allow you to get more power out of your solar array, and really optimize the power you get from your pump. The design allows you pump water earlier or later in the day, than you normally could. It gives you an increase of about 30% more flow than you would normally have. The controllers are specifically designed to maximize solar powered submersible pumps. The Shurflo 902-100 Pump Controller is for 24V systems, and the Shurflo 902-100 Pump Controller is auto-sensing, can work with 12V or 24V systems. The 200 is also in a sealed waterproof box designed to operate in more extreme environments. See more features below. So even on less than optimum solar days, you can get more consistent, reliable performance from your pump, when used with a controller.
902-100 Features:
Operates on 24 VDC
Increases daily water output up to 30%
System starts pumping earlier in the morning
System stops pumping later in the evening
Protects pump from low or high voltage conditions
Terminals for float switch
902-200 Features:
Includes all 902-100 features plus:
Switch selectable for 12 VDC or 24 VDC operation
Pump On / Off switch
Water tight enclosure and cable inlets
Includes water level monitor mode with probes and cable
The versatile 902-200 has all the features of the 902-100 and more. This controller is switch selectable for 12 VDC or 24 VDC operation and includes a manual on/off switch for easy pump maintenance. The controller comes with high / low water level sensors so the pump will not run when the well water is too low. Weather proof enclosure.
902- 100 / 200 Specifications:
Maximum power output 150 Watts
Over temperature shutdown 176ºF (80ºC)
Ambient temperature 14ºF (-10ºC) to 113ºF (45ºC)
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
Shurflo Submersible Pump Controllers 902-100 Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full. So why should you get a controller with your pump? Well, bottom line is they allow you to get more power out of your solar array, and really optimize the power you get from your pump. The design allows you pump water earlier or later in the day, than you normally could. It gives you an increase of about 30% more flow than you would normally have. The controllers are specifically designed to maximize solar powered submersible pumps. The Shurflo 902-100 Pump Controller is for 24V systems, and the Shurflo 902-100 Pump Controller is auto-sensing, can work with 12V or 24V systems. The 200 is also in a sealed waterproof box designed to operate in more extreme environments. See more features below. So even on less than optimum solar days, you can get more consistent, reliable performance from your pump, when used with a controller. 902-100 Features: ---Operates on 24 VDC ---Increases daily water output up to 30% ---System starts pumping earlier in the morning ---System stops pumping later in the evening ---Protects pump from low or high voltage conditions ---Terminals for float switch 902-200 Features: Includes all 902-100 features plus: ---Switch selectable for 12 VDC or 24 VDC operation ---Pump On / Off switch ---Water tight enclosure and cable inlets ---Includes water level monitor mode with probes and cable The versatile 902-200 has all the features of the 902-100 and more. This controller is switch selectable for 12 VDC or 24 VDC operation and includes a manual on/off switch for easy pump maintenance. The controller comes with high / low water level sensors so the pump will not run when the well water is too low. Weather proof enclosure. 902- 100 / 200 Specifications: ---Maximum power output 150 Watts ---Over temperature shutdown 176ºF (80ºC) ---Ambient temperature 14ºF (-10ºC) to 113ºF (45ºC)
SHURFLO 902-100 SUBMERSIBLE SOLAR PUMP CONTROLLER 9300 SERIES 24VOLT
Shurflo Submersible Pump
Controllers
902-100
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.
So why should you get a controller with your pump? Well, bottom line is they allow you to get more power out of your solar array, and really optimize the power you get from your pump. The design allows you pump water earlier or later in the day, than you normally could. It gives you an increase of about 30% more flow than you would normally have. The controllers are specifically designed to maximize solar powered submersible pumps. The Shurflo 902-100 Pump Controller is for 24V systems, and the Shurflo 902-100 Pump Controller is auto-sensing, can work with 12V or 24V systems. The 200 is also in a sealed waterproof box designed to operate in more extreme environments. See more features below. So even on less than optimum solar days, you can get more consistent, reliable performance from your pump, when used with a controller.
902-100 Features:
Operates on 24 VDC
Increases daily water output up to 30%
System starts pumping earlier in the morning
System stops pumping later in the evening
Protects pump from low or high voltage conditions
Terminals for float switch
902-200 Features:
Includes all 902-100 features plus:
Switch selectable for 12 VDC or 24 VDC operation
Pump On / Off switch
Water tight enclosure and cable inlets
Includes water level monitor mode with probes and cable
The versatile 902-200 has all the features of the 902-100 and more. This controller is switch selectable for 12 VDC or 24 VDC operation and includes a manual on/off switch for easy pump maintenance. The controller comes with high / low water level sensors so the pump will not run when the well water is too low. Weather proof enclosure.
902- 100 / 200 Specifications:
Maximum power output 150 Watts
Over temperature shutdown 176ºF (80ºC)
Ambient temperature 14ºF (-10ºC) to 113ºF (45ºC)
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
Shurflo Submersible Pump
Controllers
902-100
Boost your DC solar pumps performance by up to 30%. Controller optimizes your solar water pumping system by translating the current and voltage available from your photovoltaic panels, into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop pumping when the reservoir is full.
So why should you get a controller with your pump? Well, bottom line is they allow you to get more power out of your solar array, and really optimize the power you get from your pump. The design allows you pump water earlier or later in the day, than you normally could. It gives you an increase of about 30% more flow than you would normally have. The controllers are specifically designed to maximize solar powered submersible pumps. The Shurflo 902-100 Pump Controller is for 24V systems, and the Shurflo 902-100 Pump Controller is auto-sensing, can work with 12V or 24V systems. The 200 is also in a sealed waterproof box designed to operate in more extreme environments. See more features below. So even on less than optimum solar days, you can get more consistent, reliable performance from your pump, when used with a controller.
902-100 Features:
Operates on 24 VDC
Increases daily water output up to 30%
System starts pumping earlier in the morning
System stops pumping later in the evening
Protects pump from low or high voltage conditions
Terminals for float switch
902-200 Features:
Includes all 902-100 features plus:
Switch selectable for 12 VDC or 24 VDC operation
Pump On / Off switch
Water tight enclosure and cable inlets
Includes water level monitor mode with probes and cable
The versatile 902-200 has all the features of the 902-100 and more. This controller is switch selectable for 12 VDC or 24 VDC operation and includes a manual on/off switch for easy pump maintenance. The controller comes with high / low water level sensors so the pump will not run when the well water is too low. Weather proof enclosure.
902- 100 / 200 Specifications:
Maximum power output 150 Watts
Over temperature shutdown 176ºF (80ºC)
Ambient temperature 14ºF (-10ºC) to 113ºF (45ºC)